Key Features of Garrett AT Pro Metal Detector ATpro features

Garrett At pro metal detector features

 

Key Features of AT PRO™ Metal Detector

Garrett At Pro Metal Detector

  • Pro Mode Audio™: Proportional Audio and Tone Roll Audio™ features allow the user to hear characteristics of a target as they would in a True All-Metal Mode.
  • High-Res Iron Discrimination™: Use touchpads to set iron discrimination inone of 40 levels for precise ability to separate good targets from trash.
  • Digital Target ID: 0 to 99 Target ID scale offers increased ability to distinguishone target’s conductivity from another.
  • Iron Audio™: Allows the user to hear discriminated iron and to alter the detector’s mid-tone signal’s range
  • Fast Recovery Speed: Allows greater ability to pick out good targets amongst trash
  • All Terrain Versatility: Weatherproof housing designed for dusty, humid or wetenvironments; unit can be submerged to a maximum 10-foot depth.
  • 15 kHz frequency: improved detection of small targets, gold nuggets, jewelry
  • Ground Balance: automatic and manually adjustable for improvedperformance
  • Graphic Target Analyzer™ (GTA): identifies target’s conductivity
  • Continuous Coin Depth Indicator: to determine target depth
  • Battery Condition Indicator: shows battery life continually
Search Modes (Discrimination Patterns): 6 plus electronic pinpointing
  • Select from Custom, Zero or Coins in Standard Mode or in Professional Mode
  • Pinpoint

 

Garrett Ace 250 metal detector is the best of Garrett Ace Series for general detecting vs Ace 150 350

Even though, All Garrett Ace series are very popular. But it seems that Ace 250 came out to be the true winner of Garrett Ace series for general type detecting, coins, jewelry. and this is why
Ace 250 is a better unit than Ace 150 because it has more notches (better discriminations and identification) and push button pinpointing. the price difference between Ace 250 and 150 is not much so it is justifiable to get the Ace 250 instead.
Ace 250 is a better unit than Ace 350 in the sense that it uses a concentric coil rather than DD type. Concentric coil as a cone shape signal and DD has a parallel type one, the cone shape penetrates deeper.
Ace 250 is a better unit that Ace 350 because DD coil is a magnet for bottle caps. So you pick up fewer bottle caps with Ace 250. Besides that Ace 250 operates in lower frequency that makes it to penetrate deeper than Ace 350 if identical coil type used.

The overall rating of Ace 250 is very high, there are more Ace 250 metal detectors used and sold than All models of All other brands combined. Ace 250 is an amazing detector.

Vibra-Probe 580 Pinpointer Metal Detector to pinpoint the target waterpoof to 100 feet

Vibra-Probe 580Pinpointer Metal Detector



Thinking about buying a pinpointer metal detector?Don’t do it!Unless it has the following features…

 


  • Tip-only detection
  • Tilt on & off
  • Pulse Induction (PI) technology
  • Communicates with vibration
  • Automatic calibration
  • Low-battery indicator
  • Waterproof – Submersible to 100 feet (30 meters)
  • Auto-off (after one minute) battery saver



Introducing the Vibra-Probe 580

The only pinpointer with tip only detection, so you know precisely where the target is.

No push button switches. The Vibra-Probe uses our unique tilt on & off technology, in addition to our traditional one-minute automatic-off battery saver. This translates into faster recovery times and longer battery life.

No annoying buzzers! The Vibra-Probe is the original pinpointer that communicates with vibration. It alerts only you that you’ve found a target.

Never worry about dirt, dust, mud or water because our unique sealed design is airtight and waterproof to a depth of 100 feet.

No fumbling with knobs! The Vibra-Probe 580 is fully automatic. The self-calibrating microprocessor-controlled circuitry requires no adjustments of any kind.

The included belt holster makes it easy to carry and always at the ready.

Vibra-Probe 580$call A&S Company 1 800 301 6151 or 408-248-1233

metal detector headphones by detector pro best in the market

Detector Pro Headphones for Metal Detectors

DetectorPro Headphones Title.jpg (6461 bytes)
The Best Metal Detector Headphones In Years for Coin, Relic, Nugget and Jewelry Metal Detecting!

Designed for detectorists who want an economical alternative to our professional line.

NEW! Now Available!

Treasure EarsTM stereo headphones were designed to accommodate the detectorist who desires a lightweight comfortable headphone with a price point below our professional grade phones.

Technical Specifications:

  • Designed in the U.S.A.
  • Excellent sound quality for metal detecting
  • Separate volume control for each ear
  • Comfortable lightweight design
  • Adjustable headband with Stainless Steel frame
  • Coiled cord for easy extension
  • 1/4″ right-angle plug
  • Built with quality materials
  • Speakers designed for maximum sensitivity
  • Power Output: 100 milli-watts
  • Impedance: 32 Ohms
  • Sensitivity: 105 db
  • Cord Length: 6 ft. (extended)
  • Backed by a 1 Year Warranty
Our NEW Treasure Ears headphones were designed to satisfy the demand for an economical alternative to our professional headphone line. Great performance, features, and quality materials at a great price!

Black Widow is engineered for detectorists with challenged hearing and for hunting environments with high ambient noise levels.

Black Widow headphones were designed to accommodate the professional detectorist with special hearing requirements and for environments with high ambient noise levels. Large extended muffs are designed to block ambient noise to a higher degree for huntsites in proximity to urban traffic and surf roar. The Black Widow contains a dual mini-toggle switching system like our famous Gray Ghost Ultimate. One switch provides greater compatibility with detector audio systems and the other switch allows signal limitation when extreme volume is not required. Also provided are two independent volume controls for those detectorists with unequal hearing ability in each ear. You still get our “industry first” quality components, design and construction without compromise. Black Widows are “deadly”, but guaranteed not to “Sting” you!CAUTION: The significant volume output of the Black Widow compared to our main line of headphones requires us to warn the consumer of potential eardrum damage if detector signal is not regulated to tolerant levels. Without the limiting circuit engaged, we recommend starting with a minimal headphone volume control setting with detector volume at maximum, then gradually increase headphone volume controls as needed and tolerated.

Technical Specifications:

  • Dual rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty strain relieved coil cable with special 1/4″, 90 degree angle stereo connector.

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum volume, sensitivity, efficiency, durability, and signal quality.
  • Special ultra sound-blocking extended muff design eliminating environmental ambient noise up to 29 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 db @ 1 KHz Min.
  • Impedance: 150 ohms nominal.
  • Backed by a limmited lifetime warranty.
Black Widow headphones were created to accommodate the professional detectorist with special hearing requirements and for environments with high ambient noise levels. They have extreme output and noise blocking capacity. Still built with our “industry first” quality components, design and construction without compromise.

The Rattler headphone is designed for the demanding professional electronic prospector and gold nugget hunter. Your safety in the field is crucial and we’re sure you’ll never want to use anything but the Rattler!

Have you ever been afraid of not hearing a snake or having someone sneak up behind you because you were wearing sound blocking headphones?

Now you can have the superb Gray Ghost sound and still hear what’s around you. This special headphone lets you hear your detector’s signals through one earcup while your other ear is left uncovered to hear things such as dangerous reptiles and snakes. You still have a volume control and a compatibility switch to enable the headphone to work with various detectors. Our new Rattler headphone has been custom designed specifically for the gold nugget hunter. This headphone is engineered rugged, tough, and made to stand up to outdoor use and have the signal power to hear the smallest nuggets!

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty coil cable available with special 1/4″, 90 degree angle stereo connector.

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muff with full-ear surround, soft comfortable cushion.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speaker designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels in one ear only.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.
Rattler headphone is designed to allow hearing outside noises in one ear thus warning you to dangerous reptiles, snakes and even someone sneaking up behind you. In your other ear, you will get the performance of our famous Gray Ghost line of headphones. Built to satisfy the needs of demanding professional electronic prospectors and gold nugget hunters who frequent areas of dangerous reptiles. We feel your safety in the field is crucial and we’re sure you’ll never want to use anything but the Rattler!

Gray Ghost Logo.jpg (9397 bytes)

Special DMC version designed for use with NautilusTM DMC & Minelab CTX detectors or any two-channel audio equipment that presents different signals to each ear.

Relic & Coin Hunters… Give yourself the superb Gray Ghost sound made especially for your Nautilus DMC detectors. Each channel has its own separate limiter and separate volume control. Made especially for Nautilus DMC and Minelab CTX metal detectors.

Technical Specifications:

  • Separate volume control for each channel
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special built-in signal limiting circuitry on each channel to protect hearing from high volume hits… no batteries!
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Gray Ghost Logo (small).jpg (5694 bytes)

Built upon the solid foundation of the Famous Original Gray Ghost, NDT Means “No Down Time!” 

Gray Ghost NDT Headphones

Does this sound familiar… A month of research and you’ve just hiked two miles into the forest after pinpointing an old cellar hole on an old map. You can only afford one set of quality headphones. As you setup your detector and power on, you hear nothing! Suddenly you remember the tree branch that caught and yanked your headphone cord really hard. Luckily you packed mini-phones, but they have an 1/8″ plug and you lost the adaptor! Now you’ll have to settle for using the loudspeaker to hear the deepest old coins, jewelry and relics… That is if your detector has a built-in speaker!

If this has happened to you, you already know the value of having a good backup. Our universal GRAY GHOST® NDT headphones are based on the strong features of our already famous Gray Ghost Originals. For the NDT, we have engineered a very rugged detachable cord with a high-quality connector system and we give you TWO complete cords! You can have your choice of cords with two 1/4″ plugs or two 1/8″ plugs… Or you can have one of each size.

So next time you plan on a serious day of metal detecting, don’t take chances, bring the GRAY GHOST® NDT.

Technical Specifications:

  • High-quality locking connector system

Gray Ghost High-Quality Locking Connector

  • Dual rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with your choice of two 1/4″ or two 1/8″ stereo connectors, or one of each size

Gray Ghost NDT Cable Plug Choices

  • Compact carry and storage foldable design.Gray Ghost NDT Compact Fold and Carry
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special built-in signal limiting circuitry to protect hearing from high volume hits… no batteries!
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Gray Ghost Logo (small).jpg (5694 bytes)

The Ultimate Gray Ghost® is our new no-holds-barred category killer headphone.

 Ultimate Gray Ghost Title.jpg (5209 bytes)Ultimate_Gray_Ghost_Phones.jpg (22220 bytes)

This is one headphone you have to try for yourself in order to believe. We started with our now famous Original Gray Ghost headphone and added all the custom enhancements our customers have been requesting most. Now you too can have the ultimate sound quality made possible by special speaker elements in a tuned cavity design. This design means greater sensitivity to tiny targets and more raw power at full volume. The Original Gray Ghost’s switch has been removed in favor of more durable push-buttons in shielded locations by the main strain relief. Our special limiter circuit gives you a smooth reduction at excess volume levels, not like our imitators’ noise-inducing clipping effect, and our limiter can be disabled with the touch of a button. Additional new features are an industrial grade nylon 6/6 strain relief at a new neck-hugging angle. This reduces stress on the cable and helps it fall closer to your body for fewer branch snags in the most rugged terrain. Try one and we are sure you will agree that no one has ever built a metal detector headphone anywhere near this clear and this sensitive with as many features as the Ultimate Gray Ghost.

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Push-button selector switch for metal detector compatibility without adapters.
  • Push-button switch activates limiter.
  • Special low-noise signal limiting circuitry protects your hearing from high volume hits without batteries.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coiled cord with a special three conductor 1/4″, 90 degree angle stereo connector.
  • Industrial grade Nylon 6/6 pigtail strain relief on cord termination.

Compact_Utimate.jpg (6113 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speaker elements are the ultimate in sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Backed by a limited lifetime warranty.

Gray Ghost Logo (small).jpg (5694 bytes)

The Original Gray Ghost is designed for the demanding professional coin, relic, and jewelry hunter. These phones are built by detector people for detector people.

 Original Gray Ghost Title.jpg (5060 bytes)Original Gray Ghost Phones.jpg (22225 bytes)

Now for the first time there is a serious alternative to the many headphones available in the past for metal detecting. Our new Gray Ghost® Headphones have been custom designed specifically for metal detector users. Start hearing those “ghost signals” others are missing. Our headphones are engineered rugged, tough, and made to stand up to outdoor use. Gone are the days of wimpy phones that break on the littlest twig… gone are the days when outdoor noise kept you from hearing the deepest targets… gone are the days when headphones wouldn’t stay on your head… gone are the days of discomfort and loss of concentration… gone are the days of frustrating two-knob volume adjustments… and with our special sound limiting circuitry, gone are the days of headaches from too loud hits!

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

Compact Original.jpg (4955 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special built-in signal limiting circuitry to protect hearing from high volume hits… no batteries!
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Gray Ghost DMC

NEW! Attention Relic & Coin Hunters using Nautilus DMC metal detectors… Now you can have the superb Gray Ghost sound in each channel of  your detector controlled by independent volume controls!

Gray Ghost NDT

NDT means “No Down Time!” Built on the solid foundation of the Original Gray Ghost, the Gray Ghost NDT comes with two detachable cables, each with a high-quality locking connector and your choice of plug sizes. Hunt with a new feeling of security!

Ultimate Gray Ghost

The Ultimate Gray Ghost is our second generation premium headphone with the best sound available anywhere. Top treasure hunters in every field have told us the Ultimate Gray Ghost is the new leader of the pack.

Original Gray Ghost

The Original Gray Ghost was our first deluxe headphone and it is still the most popular for the demanding professional coin, relic, and jewelry hunter. These phones are built by detector people for detector people.

Gray Ghost Deep Woods

The Gray Ghost Deep Woods is for die-hard relic hunters or anyone who pushes into the most hostile treasure hunting environments.

 

Gray Ghost Logo (small).jpg (5694 bytes)

The Gray Ghost Deep Woods takes you into the roughest back country.

 Gray Ghost Deep Woods.jpg (6420 bytes)Gray Ghost Deep Woods Phones.jpg (20806 bytes)

The Gray Ghost Deep Woods is designed for the die-hard relic hunter. We’ve improved our Original Gray Ghost® to stand up to the most severe abuse. The Deep Woods has no exterior controls, no exposed metal, rainproofing, cable strain reliefs, and nothing to catch on branches. Like the Ultimate, the cable is protected by the best strain relief and improved placement places it along the neck away from branches. Our special limiter circuit gives you a smooth reduction at excess volume levels, not like our imitators’ noise-inducing clipping effect. Our metal detector compatibility and limiter switches are easily accessible on the inside of the cup where they are totally protected.

Technical Specifications:

  • Selector switch for metal detector compatibility without adapters.
  • Selector switch for limiter.
  • Special low-noise signal limiting circuitry protects your hearing from high volume hits without batteries.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coiled cord with a special three conductor 1/4″, 90 degree angle stereo connector.
  • Industrial grade Nylon 6/6 pigtail strain relief on cord termination.

 Compact Deep Woods.jpg (5657 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speaker elements are the ultimate in sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Nuggett Busters Logo.jpg (12544 bytes)

Nugget Busters were designed for the demanding professional electronic prospector and gold nugget hunter. If you’re just getting started in gold hunting, we’re sure you’ll never want to use anything but Nugget Busters! Nugget Buster Phones.jpg (23085 bytes)

Our new Nugget Busters headphones have been custom designed specifically for the gold nugget hunter. Start hearing the “whisper signals” others are missing. Our headphones are engineered rugged, tough, and made to stand up to outdoor use. Gone are the days of wimpy phones that break on the littlest twig… gone are the days when outdoor noise kept you from hearing the deepest targets… gone are the days when headphones wouldn’t stay on your head… gone are the days of discomfort and loss of concentration… gone are the days of frustrating two-knob volume adjustments… just wide-open signal power to hear the smallest nuggets!

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

Compact Nuggett Busters.jpg (5965 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Nugget Busters

Nugget Busters were designed to the specifications of demanding professional electronic prospectors and gold nugget hunters. They are similar to the Original Gray Ghost but without any limiter for wide-open sound. If you’re just getting started in gold hunting, we’re sure you’ll never want to use anything but Nugget Busters.

Nugget Busters NDT

Based on the specifications of demanding professional electronic prospectors and gold nugget hunters. They are similar to the Gray Ghost NDT but without any limiter for wide-open sound. Engineered for No Down Time in the field from cord breakage.

 

Built upon the solid foundation of the Famous Original Gray Ghost, NDT Means “No Down Time!” 

 Does this sound familiar… A month of research and you’ve just hiked a mile into the desert after pinpointing an old claim site on an old map. You can only afford to carry one set of quality headphones. As you setup your detector and power on, you hear nothing! Suddenly you remember back at the car when the door caught and yanked your headphone cord really hard. Luckily you packed mini-phones, but they have an 1/8″ plug and you lost the adaptor! Now you’ll have to settle for using the loudspeaker to hear the deepest nuggets, old coins and relics… That is if your detector has a built-in speaker!

If this has happened to you, you already know the value of having a good backup. Our universal Nugget Busters NDT® headphones are based on the strong features of our already famous Gray Ghost NDT®. For the Nugget Busters NDT, we have engineered a very rugged detachable cord with a high-quality connector system and we give you TWO complete cords! You can have your choice of cords with two 1/4″ plugs or two 1/8″ plugs… Or you can have one of each size.

So next time you plan on a serious day of metal detecting, don’t take chances, bring the Nugget Busters NDT.

Technical Specifications:

  • High-quality locking connector system

  • Dual rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with your choice of two 1/4″ or two 1/8″ stereo connectors, or one of each size

Gray Ghost NDT Cable Plug Choices

  • Compact carry and storage foldable design.
  • Less reflective muff color
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • No limiting circuitry for loud wide-open signaling.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 24 decibels.
  • Frequency response: 200 – 3200 Hz… only what your detector uses.
  • Sensitivity: 72 dB @ 1kHz min.
  • Impedance: 150 ohms nominal.
  • Backed by a limited lifetime warranty.

Jolly Rogers Logo.jpg (9532 bytes)

Our NEW Jolly Rogers Ultimates have added features usually found only on more expensive headphones.

Built upon the foundation of our popular original Jolly Rogers headphones, we now introduce the Jolly Rogers Ultimates! You get the same rugged construction and quality as the originals, but now with added features like Dual Volume controls and our famous Limiter Switch that reduces the volume of excessively loud signals. Our special limiter circuit gives you a smooth reduction at excess volume levels, not like our imitators’ noise-inducing clipping effect. Our limiter can be disabled with the click of a toggle. You’ll like the way these headphones cover your entire ear comfortably and block out ambient noise allowing you to hear the faintest signals. You’ll like the solid feel of the comfortable headband to earcup adjustment and the fact there are no parts to rust or corrode. You’ll like the feel of the soft earcup cushion material against your head. You’ll like our segmented volume adjustment controls that stay put where you want them to be. You’ll like the way Jolly Rogers fold up to take less space in your equipment bag or case. Last but not least, you’ll love the solid performance of Jolly Rogers Ultimates headphones and the fact that they are protected by a limited lifetime warranty!

Technical Specifications:

  • Dual-rotary volume control with “stay put” segmented “click” positioning.
  • Limiter Switch for reduction of excessively loud target signals.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 20 decibels.
  • Frequency response: 150 Hz – 20 kHz… only what your detector uses.
  • Impedance: 16 ohms nominal.
  • Backed by a limited lifetime warranty.

Jolly Rogers Ultimates

NEW Jolly Rogers Ultimates have Dual Volume Controls and our famous Limiter Circuit. Everything you love about our original Jolly Rogers, but now with more features usually found only on more expensive headphones!

Jolly Rogers

Jolly Rogers are smaller and lighter but still engineered tough for the beginner and the professional coin, relic, gold nugget, and jewelry hunter.

 

Jolly Rogers Logo (small).jpg (7496 bytes)

Jolly Rogers are engineered for the beginning and professional coin, relic, gold nugget, and jewelry hunter.

Jolly Rogers Title.jpg (3807 bytes)Jolly Rogers Phones.jpg (24019 bytes)

Have a Jolly Good Time finding treasure with our new Jolly Rogers metal detector headphones. By “Jolly Good Time” we mean you’ll find them super comfortable, adjustable, and they just plain stay on your head! In fact, Jolly Rogers headphones have the same rugged construction as our now famous, full-featured professional Gray Ghost headphones. You’ll like the way these headphones cover your entire ear comfortably and block out ambient noise allowing you to hear the faintest signals. You’ll like the solid feel of the comfortable headband to earcup adjustment and the fact there are no parts to rust or corrode. You’ll like the feel of the soft earcup cushion material against your head. You’ll like our segmented volume adjustment control that also stays put where you want it to be. You’ll like the way Jolly Rogers fold up to take less space in your equipment bag or case. Last but not least, you’ll love the solid performance of Jolly Rogers headphones and the fact that they are protected by a limited lifetime warranty!

Technical Specifications:

  • Single rotary volume control with “stay put” segmented “click” positioning.
  • Selector switch for metal detector compatibility with all single-output metal detectors without adapters.
  • Heavy-duty muff-to-muff connection cable.
  • Heavy-duty coil cable with special 1/4″, 90 degree angle stereo connector.

Compact Jolly Rogers.jpg (6109 bytes)

  • Compact carry and storage foldable design.
  • Heavy-duty polymer muffs with full-ear surround, soft comfortable cushions.
  • Adjustable padded headband… no screws, no wire frame, no rust!
  • Speakers designed for maximum sensitivity, efficiency, durability, and signal quality.
  • Special sound-blocking muff design eliminating environmental ambient noise up to 20 decibels.
  • Frequency response: 150 Hz – 20 kHz… only what your detector uses.
  • Impedance: 16 ohms nominal.
  • Backed by a limited lifetime warranty.

 

Our prices:

Black Widow $135 Free Shipping

Nugget Buster NDT $135 Free Shipping

Gray Ghost NDT $135 Free Shipping

Gray Ghost Ultimate $126 Free Shipping

Gray Ghost Original $98 Free Shipping

Gray Ghost Deep Woods $98 Free Shipping

Rattler $85 Free Shipping

Gray Ghost DMC $108 Free Shipping

Gray Ghost Underwater $135 Free Shipping

Nugget Buster $98 Free Shipping

Jolly Rogers $81 Free Shipping

Jolly Rogers Ultimates 108 Free Shipping

Treasure Ears $45 Free Shipping

Back to Metal Detector Page

Lowest Metal Detector Sale Prices

Garrett Infinium land and sea LS Metal Detectors’s Key Features

Key Features of Infinium LS land and sea

  • Circuit type: Advanced Pulse Induction technology for automaticcancellation of salt/ground mineralization
  • Audio Threshold, Adjustable: adjust to user’s preference
  • User-adjustable Discrimination with Quick Iron Check
  • User-adjustable Frequency: adjust to reduce interference
  • Automatic Ground Track with 3 settings:
    • Slow—Use over slowly changing ground mineralization.
    • Lock—Locks ground track setting; use for most ground conditionsand offers maximum depth.
    • Fast—Use over extreme or quickly changing ground mineralization.
  • Volume control: on land headphones (included)
  • Salt Elimination Aid: eliminate interference of salt mineralization at beach
  • Hip Mount Battery Pack: reduces detector weight for long searches
  • Battery Life: Alkaline (included), 10-15 hours. Battery recharger for AC andautomobile included. Rechargeable (included), 7-10 hours.

Search Modes:

  • Motion All Metal with adjustable PI discrimination

Infinium LS Metal Detector

Product No. 1152070…..

Specifications

Multiple Frequency Technology 96 frequencies
Circuit Type Advanced Pulse Induction
Discrimination Full Range (PI)
Search Modes Motion, All Metal Deepseekingwith Adjustable PI discrimination
Detection Frequency 730 pulses per second, adjustable
Submersion Depth 200 feet (65m); (underwaterheadphones required)
Standard Searchcoil 10″x14″ PROformance™ DD
Standard Land Headphones Included; weight 16 oz. (.45 kgs.)
Length (Adjustable) 28″ to 52″ (.71m – 1.32m)
Total Weight 5.5 lbs. (2.5 kgs.) stem-mounted,3.8 lbs. (1.72 kgs.) hip-mounted
Control Housing 31 oz. (.88 kgs.)
Detector Buoyancy Near neutral
Batteries 8 AA (included); rechargeables included
Warranty 2 Year, Limited Parts/Labor

Infinium LS is the best salt water PULSE INDUCTION metal detector

Call for the best price 1800 301 6151

Garrett Metal Detectors

Back to Metal Detectors Main Page

 

 

top 10 best selling metal detectors 2013

 


 

 

Top 10 Best Selling Metal Detectors 2013 are:

1- Garrett Ace 250 Metal Detector

2- Garrett AT Pro Metal Detector

3- Garrett Ace 150 Metal Detector

4- Garrett Ace 350 Metal Detector

5- Garrett GTI 2500 Metal Detector

6- Fisher F 75 Metal Detector

7- Teknetics T2 Metal Detector

8- Teknetics Omega 8000

9- Tesoro Outlaw Metal Detector

10- Tesoro Tejon Metal Detector

And the best selling most popular pinpointer is:

Garrett Pro-Pointer

 

 

Garrett ace 250 metal detector : Key features and Specs

Garrett Ace 250 metal detector Key Features



  • Electronic Pinpointing: to precisely locate target and speed recovery




  • Accept/Reject Discrimination: to modify discrimination patterns




  • Five Search Modes: select pre-set discrimination pattern or create your own




  • Continuous Coin Depth Indicator: to determine target depth




  • Battery Condition Indicator: shows battery life continually




  • Interchangeable ACE series searchcoils: are available




  • Expanded Target ID Legend: easy-to-read above large LCD screen




  • Pushbutton Controls: with One-Touch operation




  • Other features: 3-piece travel/storage, disassembles to 24″; adjustable

    arm cuff; quarter-inch (1/4″) size headphone jack.



Search Modes (Discrimination Patterns): 5 plus electronic pinpointing




  • All Metal (Zero)

  • Jewelry

  • Custom

  • Relics

  • Coins

  • Pinpoint



ACE 250 Metal Detector

Specifications:






































































Target ID Cursor Segments 12
Iron Discrimination Segments 2
Accept/Reject Discrimination YES
Search Modes 5 (plus Pinpoint)
Sensitivity/Depth Adjustments 8
Electronic Pinpointing YES
Frequency 6.5 kHz
Audio Tone ID Levels 3
Standard Searchcoil 6.5″ x 9″ PROformance™
Length (Adjustable) 42″ to 51″ (1.06m – 1.29m)
Total Weight 2.7 lbs. (1.2 kgs.)
Batteries 4 AA (included)
Warranty 2 Year, Limited Parts/Labor

Key Features of Garrett Ace 250 Metal Detector and Specs

Garrett Ace 250 metal detector Key Features

  • Electronic Pinpointing: to precisely locate target and speed  recovery
  • Accept/Reject Discrimination: to modify  discrimination patterns
  • 5 Search Modes: select pre-set discrimination pattern or create your own
  • Continuous Coin Depth Indicator: to determine target depth
  • Battery Condition Indicator: shows battery life continually
  • Interchangeable ACE series searchcoils: are available
  • Expanded Target ID Legend: easy-to-read above large LCD screen
  • Pushbutton Controls: with One-Touch operation
  • Other features: 3-piece travel/storage, disassembles to 24″; adjustablearm cuff; quarter-inch (1/4″) size headphone jack.

Search Modes (Discrimination Patterns): 5 plus electronic pinpointing

  • All Metal (Zero)
  • Jewelry
  • Custom
  • Relics
  • Coins
  • Pinpoint

Garrett ACE 250 Metal Detector

Specifications:

Target ID Cursor Segments 12
Iron Discrimination Segments 2
Accept/Reject Discrimination YES
Search Modes 5 (plus Pinpoint)
Sensitivity/Depth Adjustments 8
Electronic Pinpointing YES
Frequency 6.5 kHz
Audio Tone ID Levels 3
Standard Searchcoil 6.5″ x 9″ PROformance™
Length (Adjustable) 42″ to 51″ (1.06m – 1.29m)
Total Weight 2.7 lbs. (1.2 kgs.)
Batteries 4 AA (included)
Warranty 2 Year, Limited Parts/Labor

features of ace 150 metal detector


Key Features of Ace 150 metal detector

  • Coin Depth Indicator to determine target depth
  • Low Battery Indicator: icon remains on when batteries become weak
  • Headphone Jack: quarter-inch (1/4") size
  • Interchangeable ACE series searchcoils: are available
  • Large LCD Screen with easy-to-read Target ID Legend
  • Pushbutton Controls: with One-Touch operation
  • 3-piece Travel/Storage: disassembles to 24"
  • Adjustable Arm Cuff
  • Ace 150 metal detector very low price

Search Modes (Discrimination Patterns): 3

  • All Metal (Zero)
  • Jewelry
  • Coins
Design features and specifications are subject to change without notice.

Specifications

Target ID Cursor Segments 5
Iron Discrimination Segments 1
Accept/Reject Discrimination NO
Search Modes 3
Sensitivity/Depth Adjustments 4
Electronic Pinpointing NO
Frequency 6.5 kHz
Audio Tone ID Levels 3
Standard Searchcoil 6.5" x 9" PROformance™
Length (Adjustable) 42" to 51" (1.06m – 1.29m)
Total Weight 2.7 lbs. (1.2 kgs.)
Batteries 4 AA (included)
Warranty 2 Year, Limited Parts/Labor


Some features of ace 150 metal detector

ace 150 metal detector features

Key Features of Ace 150 metal detector

  • Coin Depth Indicator to determine target depth
  • Low Battery Indicator: icon remains on when batteries become weak
  • Headphone Jack: quarter-inch (1/4″) size
  • Interchangeable ACE series searchcoils: are available
  • Large LCD Screen with easy-to-read Target ID Legend
  • Pushbutton Controls: with One-Touch operation
  • 3-piece Travel/Storage: disassembles to 24″
  • Adjustable Arm Cuff
  • Ace 150 metal detector very low price

Search Modes (Discrimination Patterns): 3

  • All Metal (Zero)
  • Jewelry
  • Coins
Design features and specifications are subject to change without notice.

Specifications

Target ID Cursor Segments 5
Iron Discrimination Segments 1
Accept/Reject Discrimination NO
Search Modes 3
Sensitivity/Depth Adjustments 4
Electronic Pinpointing NO
Frequency 6.5 kHz
Audio Tone ID Levels 3
Standard Searchcoil 6.5″ x 9″ PROformance™
Length (Adjustable) 42″ to 51″ (1.06m – 1.29m)
Total Weight 2.7 lbs. (1.2 kgs.)
Batteries 4 AA (included)
Warranty 2 Year, Limited Parts/Labor